Rexroth WE10......3X/CW230N9K4 Solenoid directional valve

Ca:49.809 mm; H:192.484 mm; PosiTrac Plus contact element (dc shaft position):B10724-188; Initial grease fill:141.75 g; L:349.25 mm; Lock nut:AN 18; P90°:60.9 kN; P120°:38.3 kN; P150°:34.7 kN; dc:85.725 mm;

Oil Speed Rating n2:21000 rpm; Fillet Radius ra:2.00 mm; B:27.00 mm; Grease Speed Rating n1:14000 rpm; Fillet Radius rb:1.00 mm; D:110.0000 mm; Basic Static Radial Load Rating Co:52000 N; d:50.000 mm; Basic Dynamic Radial Load Rating C:76100 N;

Fillet Radius ra:1.00 mm; D:62.0000 mm; B:14.00 mm; Oil Speed Rating n2:13000 rpm; Basic Dynamic Radial Load Rating C:18600 N; Grease Speed Rating n1:10000 rpm; Basic Static Radial Load Rating Co:13200 N; Fillet Radius rb:0.30 mm; d:35.000 mm;

Adapter sleeve assembly:SNW 32x5.7/16; RG:3/4 NPT; Cap bolt recommended tightening torque:813.5 N·m; P120°:133 kN; L:558.8 mm; Max. speed for Taconite seal:560 r/min; Mass pillow block:132 kg; End plug (suffix Y):EPR 16; A1:158.75 mm; Cap bolt, SAE grade:8;

Basic Interchange NSK:-; Basic Interchange MCGILL:-; Accessories:Mast Guide Type- 307; Basic Radial Load Rating-Static SCO:48600 lbf; Basic Interchange NDH:-; Basic Interchange SPLIT:-; Basic Radial Load Rating-Dynamic DC:13600 lbf; Basic Interchange:-; Basic Interchange BCA:-;

d1:530 mm; ra max.:6 mm; Calculation factor e:0.3; D1 ≈:809 mm; B2:85 mm; Reference speed:340 r/min; b:22.3 mm; B5:110 mm; Basic static load rating C0:16000 kN; Mass bearing + sleeve:880 kg;

s:23 mm; H1:320 mm; H2:115 mm; Mass housing:339 kg; P0°:5400 kN; Appropriate attachment bolt, rec. tightening torque:2280 N·m; N4 max.:25 mm; Cap bolt, size:M 30x220; A:363 mm; Pa:1800 kN;

B5:77 mm; Hydraulic nut:HMV 96E; d3:560 mm; B:60 mm; G3:12 mm; d:480 mm; B1:200 mm; Mass adapter sleeve assembly:67.9 kg; G2:M 8; Locking device:MS 30/500-96;

r3,4 min.:3.3 mm; Fatigue load limit Pu:510 kN; Calculation factor Y0:1; Calculation factor Y1:1; D:457.098 mm; Comparative radial load rating CF:610 kN; d1 ≈:362 mm; D1 ≈:420 mm; B:254 mm; Comparative axial load rating CFa:210 kN;

Oil Speed Rating Open/Shielded n2:24000 rpm; d:17.000 mm; Basic Static Radial Load Rating Co:3250 N; Sealed Speed Rating n3:13000 rpm; B:10.00 mm; D:35.0000 mm; Basic Dynamic Radial Load Rating C:6050 N; Accessories:Snap-Ring; Grease Speed Rating Open/Shielded n1:19000 rpm; Fillet Radius ra:0.30 mm;

B:16 mm; Coefficient of friction µ min.:0.05; Specific dynamic load factor K:10 N/mm²; Tolerance housing:H7; Permissible sliding velocity v min.:0.25 m/s; Tolerance shaft:h8; Coefficient of friction µ max.:0.1; D:16 mm; d:10 mm; Mass bushing:0.013 kg;

B:16.00 mm; Basic Dynamic Radial Load Rating C:10600 N; Fillet Radius ra:0.60 mm; D:40.0000 mm; Oil Speed Rating n2:20000 rpm; d:17.000 mm; Basic Static Radial Load Rating Co:2550 N; Grease Speed Rating n1:17000 rpm;

Accessories:Without Accessories; D:140.0000 mm; B:33.00 mm; Grease Speed Rating n1:4800 rpm; Basic Static Radial Load Rating Co:60000 N; Basic Dynamic Radial Load Rating C:92300 N; Oil Speed Rating n2:5600 rpm; Grease Speed Rating Open/Shielded n1:4800 rpm; d:65.000 mm; Oil Speed Rating Open/Shielde

Grease Speed Rating n1:7000 rpm; Basic Dynamic Radial Load Rating C:30300 N; Basic Static Radial Load Rating Co:28000 N; B:27.00 mm; Fillet Radius ra:1.00 mm; Accessories:No Shield, no Seal; Sealed Speed Rating n3:7000 rpm; D:62.0000 mm; d:30.000 mm; Oil Speed Rating n2:9500 rpm;

H:230.981 mm; Housing:SAF 618; J max.:342.9 mm; J1:57.15 mm; S:4.763 mm; Initial grease fill:232.47 g; da:77.787 mm; A1:111.125 mm; P150°:44.5 kN; L:393.7 mm;